Enkei wheels at JCERacing.com

COMPE2

Enkei Wheels is bringing back its COMPE (short for Competition), reviving a classic wheel associated with the heydays of import car racing. The true old school eight-spoke wheel is the latest addition from Enkei. Available in 15 and 16 with offsets ranging from 0 to 38.

Sizes 15×5.5, 15×7, 15×8, 16×7, or 16×8
Matte Gunmetal or a Gloss White
Spec-E Inspected
* Cap may not fit with aftermarket axles

DRACO2

GTC01RR2

The GTC01RR is made after one of our strongest wheels, the GTC01. After vast research, we were able to keep the high rigidity while making it lightweight, comparable to the RPF1. The GTC01RR has been tested in high-performance categories including cornering, braking, acceleration, deceleration, and steering response. The GTC01RR is available in three different concave faces.

Sizes 18″
Matte Gunmetal
Includes two red Enkei Racing badges
Spec-E Inspected
MAT Process

GTC0216

Racing is where all of the best R&D happens. Engineers obsess over every detail looking for the slightest advantage to shave fractions of a second off of lap times. What we learn on the world’s premier circuits is eventually implemented into mainstream products and made available to the weekend racer. That’s how the new Enkei GTC02 was born. Based on the RA series wheels used in the Super GT racing series, the GTC02 pulls from the same bag of tricks as the RA series to give weekend racers the competitive edge they need to win. Utilizing a 6 split-spoke design that disperses stresses efficiently allows us to keep the spokes as thin as possible and make cuts in them on the fronts and sides to shave weight even further. The GTC02 is available in sizing ranging from 18×8 to 19×10.5 in a wide variety of PCD and offset configurations to fit most modern sports cars.

Sizes 18, 19
Hyper Silver or Matte Black
Spec-E Inspected
MAT Technology

KOJIN9

The Kojin takes the traditional 5-spoke design and adds just the right contours to give it an aggressive tuner look without being too loud about it. The Kojin is built using Enkei’s original MAT technology to achieve the ultimate in strength and light weight. The Enkei Kojin is where art and science meet to create the next big step forward in wheels. 17×9 and 18×9.5 are more concave than smaller width fitments (The photo on the left is of an 18×9.5 +15)

Sizes 17, 18
Matte Silver or Matte Black
Spec-E Inspected
MAT Technology

NT03+M Wheels28

T03+M is designed with a perimeter brace ring that enhances the wheel strength so it’s able to resist deformation or distortion from outer forces, resulting in highly accurate steering response and strength. The NT03+M also features a racing twin valve design which allows for accurate monitoring while adjusting the pressure.

Sizes 17 & 18 Inch
Available in F1 Silver or Hyper Black
Spec-E Inspected
MAT Technology

NT03RR4

PF013

PF052

Five-Spoke wheel that inherits ENKEI tradition. Engineered by the highest design technology and the latest manufacturing technology. Dynamic yet classy concave spoke design with meticulous attention.

Sizes 16, 17, 18, 19″
Available in Dark Silver, Gold (Special Order), Blue (Special Order)
Spec-E Inspected
MAT Technology

RAIJIN12

The RAIJIN is a light weight street wheel designed for the everyday driver but with added MAT technology performance benefits. Named after the Japanese god of thunder, the Raijin is bound to help you bolt through
traffic not only with style but with better overall performance.

Having a light weight wheel helps brake more efficiently, helps accelerate quicker and can even help with fuel economy. You’d be surprised how much difference a few pounds makes.

Sizes 18 or 19″
Silver, Black, Matte Gunmetal, or Copper
Spec-E Inspected
MAT Technology
Optional Flat Cap sold separately

RPF1 Wheels88

Enkei is an official supplier of the McLaren Honda Formula One Team. The RPF1 was developed using the same technology as the Formula One race wheel. TWIN SPOKES: Enkei’s dual open stance spoke design is used on the McLaren Honda Formula One race wheel. The twin spokes achieve better stress dispersion on curves, hard braking, and extreme race driving.

CENTER DESIGN: Enkei’s pocket design around the bolt circles increases rigidity and keeps the wheel cooler during aggressive race driving.

MAT PROCESS: Shaping by the MAT process reduces wheel weight by 10%-15%. Every pound of unsprung weight savings has the effect of reducing overall vehicle weight by 20lbs.

Sizes 14, 15, 16, 17, 18 (Cap not included 15×8-18×10.5, no cap available for 14×7 and 15×7)
Available F1 Silver, Gold, Black, SBC (special order)
Spec-E Inspected
MAT Technology

RPT13

The Enkei RPF1 was first introduced to the world in 2002 and it was an instant hit thanks to its high strength, low weight, and no-nonsense design. Truck and SUV owners have often asked for Enkei to develop an RPF1 for them and we listened. The all-new Enkei RPT1 features the same clean split-spoke design as the RPF1 but is built to higher loading capacities to suit 6-lug trucks and SUVs. Available in 16” 17″ and 18” applications and a variety of colors, the RPT1 is one of the lightest weight and toughest truck wheels on the market today.

Sizes 16, 17, 18
Available in Matte Dark Gunmetal
Spec-E Inspected
MAT Technology

RS05-RR Wheels7

Designed to look incredible while retaining Enkei’s racing spirit & functionality. The light weight RS05RR is made using Enkei’s MAT-DURA flow forming method. Made in 18×8.5-18×11 with 3 different concave face designs. In Silver or Matte Gunmetal. This is a special order wheel. Please ask your Enkei dealer for details.

Sizes 18″
Matte Gunmetal or Sparkle Silver
Spec-E Inspected
MAT Process

T6R12

Enkei is excited to introduce the all-new T6R to our lineup. We’ve taken some of the most dramatic design aspects that have made the TS-5 so popular and utilized them to build an equally awesome 6-spoke wheel. The T6R is an ideal option for modern sports coupes and sedans like the Civic Type R, WRX, STI, Q50, Q60, Golf GTI, and many others. Available from 17×8 up to 18×9.5 in finishes including our popular matte bronze, classic gloss black, and striking gloss gunmetal.

Sizes 17, 18
Matte Bronze, Gloss Black, Gloss Gunmetal
Spec-E Inspected
MAT Technology

T6S3

The T6S borrows its spoke profile and general design cues from the highly successful Kojin and adds a sixth spoke to achieve an aggressive, yet subtle appearance. The T6S comes standard with Enkei’s signature flat center cap, and is available in 17 and 18 inch. The T6S is also built using Enkei’s original MAT technology to achieve the ultimate in strength and light weight.

Sizes 17, 18
Matte Silver, Matte Black or in Gold (limited sizes)
Spec-E Inspected
MAT Technology

TFR6

TM-76

TS-513

The all-new lightweight Enkei TS-5 is sure to be an instant classic in the tuning world. The TS-5 is the wheel that will have everyone admiring it at a loss for words because it just does everything right. It is remarkably simple and clean, relying on the tried and true 5-spokes and a lip formula, but the TS-5 gets the aesthetics just right.

It is the golden ratio in wheel form. It screams motorsports and whispers class at the same time. It is just as much at home on the track as it is on the street. With 17” and 18” sizing and widths up to 9.5”, the TS-5 will suit a remarkable variety of sport sedans and coupes.

Sizes 17, 18
Storm Gray, Matte Bronze, and Gloss Black
Spec-E Inspected
MAT Technology

TS-74

The TS-7 is Enkei’s newest addition to the Tuning Series lineup. In fact, the TS-7 is essentially a revival of the classic Enkei RS-7. It’s not just a recreation of the old wheel though. The TS-7 utilizes Enkei’s innovative MAT technology in order to build a wheel that is both lightweight and strong. The TS-7 is available in gloss black, bronze, and storm gray, and all specs come with Enkei’s signature flat center cap. With sizing ranging from 18×8 up to 18×9.5, the TS-7 is a solid choice for cars like the Subaru WRX STI, Civic Type R, Toyota GT86, and many others.

Sizes 18
Matte Bronze, Gloss Black, Storm Grey
Spec-E Inspected
MAT Technology

TS-V17

Building on the success of the Enkei M52 and YS5 as inspiration for a lightweight new tuning wheel led us to create the all-new TSV. The TSV features 10 paired spokes that are spaced perfectly to evenly distribute the loads and stresses placed on wheels at the track. Doing this allows us to reduce the weight on the wheel without sacrificing rigidity. The result is a classic and clean wheel design that works beautifully with late model sports sedans and coupes. The TSV comes in 17” and 18” sizing and widths up to 9.5”, and is available in Storm Gray, Gloss Black, and limited Gloss Bronze.

Sizes 17, 18
Storm Gray, Gloss Bronze, and Gloss Black
Spec-E Inspected
MAT Technology

TS10 Wheels13

The all-new Enkei TS-10 takes the simplest approach to achieving Enkei’s philosophy in creating a lightweight and strong wheel. It’s 10 cleanly cut spokes reach the very edge of the wheel, creating the illusion that the wheel is bigger than its true size. The TS-10 is available in concave and flat face profiles dependent on size and width. The TS-10 is finished off with Enkei’s signature flat center cap and is available in new storm gray, gloss black, or limited gold paint.

Sizes 17, 18
Storm Gray, Gloss Black or in Gold (limited sizes)
Spec-E Inspected
MAT Technology

TS94

Clean. Simple. Effective. We kept these three elements at heart when de- signing the TS9. The TS9’s lines are clean with nothing unnecessary added. The spokes and center of the TS9 also keep this philosophy. With simple contours and equally simple side-cuts, the spokes fold into a deep center to evoke a sense of elegance. Most importantly, the TS9 achieves its real-world effectiveness through its MAT construction, which makes the wheel both light and strong. The TS9 comes standard with Enkei’s signature flat center cap, which is the perfect finishing touch.

Sizes 17, 18
Platinum Gray, Matte Black, Matte Silver (Limited Sizes)
Spec-E Inspected
MAT Technology

TSR-X2

Introducing Enkei’s first-ever Tuning Series Wheel available in 20”. Enkei’s Tuning Series wheels have taken the market by storm thanks to their high-strength MAT construction and competitive pricing. Due to increasing customer demand for a lightweight 20” wheel in this series, we are proud to introduce the all-new TSR-X. Available in Gloss Black, Bronze, and Storm Grey, the TSR-X is the perfect option for those looking to go big while keeping weight down on their late-model sports coupes, sedans, and even crossovers.

18 and 20 inch
Gloss Bronze, Gloss Black, Storm Gray (Select Sizes)
Spec-E Inspected
MAT Process

TY56

The all-new Enkei TY-5 is an exciting entry in Enkei’s lightweight Tuning series. Utilizing a sleek combination of a split 5-spoke style with the center styling cues of a mesh wheel, the TY-5 is a great choice for a wide variety of wheels ranging from small sports coupes to full-size luxury cars. It is available in several exciting colors including hyper black, gloss black, and an all-new limited pearl black. The TY5 is available in concave and flat face profiles dependent on size and width, and includes Enkei’s signature flat center cap.