Air Intake Systems

Torque Solution 01-05 Subaru WRX Throttle Body Adapter - DBC to DBW Intake Manifold

Replacement air filter for all current 996, 997, and 997.2 Fabspeed Motorsport Carbon Fiber Competition Air Intake System with the "Y" intake tube. For older systems please contact Fabspeed. FEATURES:  Fits Porsche 911 Carrera 996, 997, and 997.2...

GT3 Throttle Body adapter hose for Fabspeed's Carbon Fiber Competition Air Intake                                                ...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of...

These are replacement filters for our ETS Evolution 8/9 Stock MAF Intake Kit. These K&N filters are designed specifically for our intake kits! (SP-3604)    

Replacement intake shield for ETS Mitsubishi Evolution X Intake *This is the shield only*

Extreme Turbo Systems Evolution X Recirculating Couplers Upper = Straight Coupler Lower = Bent Coupler

This is a replacement turbo compressor outlet to intercooler pipe gasket for an ETS FMIC Kit for the 05-09 Legacy GT and the 08-14 WRX

This extension harness allows you to run the stock wiring for our 15+ WRX Intake. No splicing or cutting. Plug and play connection.

ETS is proud to release our 2015-2018 WRX Intake System. Our intake system utilizes a stock size MAF housing that doesn't require any retuning. You can bolt this on and notice immediate performance gains! Our intake also utilizes a custom billet 5"...

This helps to isolate the intake from the hot engine bay temps and provide the coldest and most direct intake charge.  Features Utilizes the factory intake duct **PLEASE NOTE THIS AIRBOX IS NOT COMPATIBLE WITH THE STOCK INTAKE - ONLY FOR THE ETS...

3-1/4 IN Internal Diameter: This 2-1/2 IN long coupling is designed to connect to a tube with a 3-1/4 IN diameter. It's commonly used on aFe POWER cold air intake systems, but can be used for a variety of projects.Flexible Bellows Silicone: Its...

3 IN to 2-1/4 IN Reducer: This coupling features a 35 Degree angle and is designed to connect to tubes with a 3 IN and 2-1/4 IN diameter. It's commonly used on aFe POWER cold air intake systems, but can be used for a variety of projects.Silicone...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of...