Edelbrock

Q-Jet Primary Metering Jets for Edelbrock and GM Rochester Q-Jet carbs. Not for computer-controlled carbs. Note: Calibration changes may affect emissions-legal status of number 1901, number 1902,...

Q-Jet Primary Metering Jets for Edelbrock and GM Rochester Q-Jet carbs. Not for computer-controlled carbs. Note: Calibration changes may affect emissions-legal status of number 1901, number 1902,...

Edelbrock Coil Pack #22791 is a set of eight coil-on-plug coils designed as direct performance replacements for the OEM coils on 2008-18 Ford 4.6L-5.4L V8 engines. This coil pack can also be used to...

Edelbrock Coil #22790 is a single coil-on-plug coil designed as a direct performance replacement for the OEM coil on 2008-18 Ford 4.6L-5.4L V8 engines and the 6.8L Triton V10 engine. Each #22790 coil...

Designed to plug the oil fill hole on any of Edelbrocks Signature Series valve covers or any 1-1/4in. diameter fill hole on similar designs.

Edelbrock Pro-Flo 4 EFI System for Chevrolet LS GEN III/IV engines. The EFI system comes with a traditional 4150-Style satin finish Victor Jr. cathedral port intake & 35 Lb/Hr injectors capable of...

Edelbrock part #17303 fuel pump is a gravity fed type pump with a simple 2 wire design. It requires approximately one amp average draw at maximum delivery and works on 12 Volt negative ground systems...

Edelbrock part #1723 Performer RPM Series fuel pump is for Big-Block Chrysler designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications.

Edelbrock #9362 Exhaust Valve is a 1.90" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits #61409 & 77409 Cylinder Heads

1-piece, swirl-polished, hardened tip stainless steel exhaust valves with undercut stems for increased flow. Hard-chromed valve stems are 11/32in. except where noted

Edelbrock #9372 Exhaust Valve is a 1.60" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits #77169, 77179, 77189, 77199, 77359 Cylinder Heads

Edelbrock Performer RPM II Dual-Stage Nitrous System #70083 is designed for those who want to add power in stages to soften the "hit" of the nitrous system. This system is for use with 4500 Series...

1-piece, swirl-polished, hardened tip stainless steel exhaust valves with undercut stems for increased flow. Hard-chromed valve stems are 11/32in. except where noted

Edelbrock Performer RPM Fuel Solenoid #72051 is made from stainless steel for corrosion for resistance and has a low amp draw. Supports up 400 horsepower and has 1/4" NPT inlet with a 1/8" NPT outlet.

The Edelbrock #97040 Intake Valves is a 2.25" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut 11/32" stem. Fits Edelbrock #61459, #61559 & #61555 Cylinder Heads.