Hardware Kits - Other

Application: 1978-1996 GM B-Body Chassis Only 1994 - 1996 Chevrolet Impala SS 1978-1996 Chevrolet Caprice 1978-1996 Buick Roadmaster 1978-1988 Buick LeSabre 1978 - 1981 Pontiac Bonneville & Catalina

100% designed, manufactured and raced out of Philipsburg, PA-USA.

Don't reuse old rusty bolts when installing aftermarket control arms when you can replace them with new ones. Our kit includes new high grade hardware for installing your new upper and lower A-Arms. Kit includes Grade 10.9 bolts, flat washers and nylon...

Don't reuse old rusty bolts when installing aftermarket control arms when you can replace them with new ones. Our kit includes new high grade hardware for installing your new upper and lower A-Arms. Kit includes Grade 10.9 bolts, flat washers and nylon...

UMI Performance 78-92 GM G-Body & F-Body Front A-Arm Hardware Kit

Note: This kit will not work with Moser Engineering 12-Bolt rear-end housings. For the Moser 12-Bolt we recommend UMI P/N 2998.

Don't reuse your old rusty bolts when installing aftermarket control arms when you can replace them with new one. Our kit includes all new hardware for installing both upper and lower rear control arms in your GM vehicle. Supplied is (8) 12 mm 10.9 High...

Don't reuse your old rusty bolts when installing aftermarket control arms when you can replace them with new ones. Our kit includes all new hardware for installing either upper or lower rear control arms in you General Motors vehicle. Supplied is (4) 12...

Note: This kit will only work with Moser Engineering 12-Bolt rear-end housings. Other rear end housings are to use torque arm hardware kit #3003.

Hardware kit P/N 2997 includes grade 10.9 bolts and Ny-lock nuts to mount the LS engine to an aftermarket k-member or any LS aftermarket motor mounts. Hardware kit is designed for aftermarket k-members and aftermarket LS adapter mounts, it will not work...

UMI’s 2664 aluminum body mounts are a direct replacement for worn out factory body mounts and are used to restore the body location to factory position. These aluminum body mounts are great for handling or drag race cars as they give the car a crisp,...

UMI's new A/C delete panel for the 2nd Generation F-Body is an excellent solution for the large hole left in the firewall after removing the A/C unit. This 0.125” thick light weight aluminum panel allows you to remove the existing A/C - heater box and...

UMI’s new mounting hardware includes zinc plated high grade bolts, washers and Ny-lock nuts for mounting your new or factory front upper and lower a-arms. Note: 1970-1974 Camaro and Firebird use ½” standard lower a-arm hardware while 1975-1981 use 14mm...

Tech Tip: P/N 2602 includes ½” lower a-arm bolts while P/N 2603 uses 14mm.

UMI’s new mounting hardware includes zinc plated high grade bolts, washers and Ny-lock nuts for mounting your new or factory front upper a-arms.