Tools

Camber change on the 2007 and up Sprinter van is quick, easyand locked in with this SPC cam kit. Get up to ± 3.0° camberchange by simply removing the upper OE bolt, loosening thelower bolt, installing and adjusting this cam kit to thedesired change and...

Replacement gauge fits our stand-along run out gauge #64250.

Deburring Knife helps to remove damaged edges on wheel holes

Electric Drill Wire Brush used to clean wheel holes beforemounting

Stainless steel replacement bands for securing the 33001Uni-Fit boot.Set of 10 - 8 in.

This set centers both steer axle wheels and brake drums tominimize wheel vibrations, brake pedal pulsations, and wheelhop. These sleeves are made specifically for the 'TAG' axleswith Accu-Ride 19.5" wheels.

Stop wheel hop and vibrations on hub piloted wheels! Hubpilot hole diameter tolerances can allow wheels to beinstalled and and tightened in an "off center" or clockedposition. Designed for UD and Volvo trucks with Hungarianmade Alcoa wheels (26.0mm stud h

Stop wheel hop and vibrations on hub piloted wheels! Hubpilot hole diameter tolerances can allow wheels to beinstalled and tightened in an "off-center" or clockedposition. The 32115 is for Ford F450/550 Super Duty.These tools slide directly over the wheel

Stop wheel hop and vibrations on hub piloted wheels! Hubpilot hole diameter tolerances can allow wheels to beinstalled and tightened in an "off center" or clockedposition. The 32111 threadless wheel centering tool set (3)fits 22mm studs on Heavy Duty and

Installing Adapter for 72509 bushing press

Using a shop press, the adapter is designed for quick, easyremoval & installation of the 15611 xAxis sealed flex jointand any other bushing with a 2.5" OD.

Using a shop press, the adapter is designed for quick, easyremoval & installation of the 15619 xAxis sealed flex jointand any other bushing with a 2.25" OD.

Using a shop press, the adapter is designed for quick, easyremoval & installation of the 15609 xAxis sealed flex jointand any other bushing with a 2" OD.

Using a shop press, the adapter is designed for quick, easyremoval & installation of the 15613, 15615, and 15616 xAxissealed flex joints or any other bushing with a 1.8125" ODand up to 2.5" wide.

Using a shop press, the adapter is designed for quick, easyremoval & installation of the 15607 xAxis sealed flex jointand any other bushing with 1.75" OD.