Additives

Exergy Diesel Additive 16oz - Case of 12

MOTUL AUTOMATIC TRANSMISSION CLEAN is a pre-drain automatic transmission cleaner designed to be used in all types of automatic transmissions, conventional with torque converters (AT), with dual clutch transmission (DCT) or with continuously variable...

TYPE OF USE: For Gasoline engines only. Add one can (300 ml) of MOTUL VALVE AND INJECTOR CLEAN every 6 months to the fuel tank before refueling. Sufficient for 16gal of gasoline. For larger tank capacities add 1% of the overall filling content...

TYPE OF USE: Add MOTUL RADIATOR CLEAN to the cooling system before each coolant drain. Move all heater controls to ?hot? position. Let the engine idle for approximately 30 minutes. Drain the system completely and flush with clean water. Refill the...

TYPE OF USE: Add MOTUL HYDRAULIC LIFTER CARE to the warm engine oil. Works during operation. A dose of 300ml is sufficient to treat 5L of engine oil. For larger sump capacities add 60ml of product per liter of engine oil.; Compatible with mineral and...

TYPE OF USE: Directly pour one can of MOTUL FUEL SYSTEM CLEAN in the gas fuel tank before refueling. The fuel system will be then gradually treated from the tank to the combustion chamber. One can of MOTUL FUEL SYSTEM CLEAN is sufficient for tank...

Provides initial lubrication of new or replaced turbochargers to prevent damage due to oil starvation. Damage to turbocharger may occur within seconds of engine start if not lubricated properly. Pro-Line Turbocharger additive will provide needed...

Add contents to the cooling water. Turn the heating to maximum and let the engine run on idle for 10 - 30 minutes depending on the degree of contamination. Drain the coolant and flush the cooling system with water. Fill the cooling system according to...

One 500 ml can is sufficient for up to 5 liters(1.3 gal.) of oil. Add Pro-Line Engine Flush to the engine oil at operating temperature before changing the oil. After adding the product allow the engine to idle for 10 to 15 minutes depending on the degree...

To be added directly into the fuel tank. As a preventive measure, add during each inspection, after repairs on the fuel system and after each Jet-Clean cleaning operation. The product mixes with the fuel automatically. Minimum fuel filling of 25 liters...

To be added directly into the fuel tank. As a preventive measure, add during each inspection, after repairs on the fuel system and after each Jet-Clean cleaning operation. The product mixes with the fuel automatically. Minimum fuel filling of 25 liters...

Keeps rubber and plastic seals in hydraulic power steering systems soft and pliable. Leaks caused by hardened and brittle seals are prevented or eliminated. Cleans internal oil passages to allow proper oil flow, reduces noise levels and extends service...

Can contents (300 ml) are sufficient for up to5 liters (5.28 U.S. QT)of motor oil. After adding to the motor oil, allow the engine to run warm. The product can be added at any time. Minimum oil filling of 3 liters (3.17 U.S. QT) is requested for optimum...

Will immediately seal small leaks caused by external damage, porous solder joints and hairline cracks in cooling systems of all water cooled engines. Coolant is prevented from entering the combustion chamber due to internal leaks from head gasket etc. It...

Cleaning is made with the compressed air gun for DPF (item no. 7946) and the specially developed DPF-Probe with 5 interchangeable tips (part no. 7945). The diesel particle filter must be accessed depending on the vehicle type. In order to do this, the...