Camber Kits

Replace corroded or stripped alignment cam assemblies on thefront of the 3rd generation Mazda Miata MX-5 with this pairof cam bolts. The heat treated cams prevent stripping orwarping. Use one kit per wheel to lock in ±1° camberadjustment.This Part...

Use this kit to replace stripped or bent OE alignment camassemblies on the Mazda Miata MX-5. SPC's cams are heattreated to prevent stripping or warping. This kit isavailable per wheel and allows full use of the ± 2° factoryadjustment range for front...

These heavy duty adjusters provide up to ±2-1/2° frontcamber change for Chysler/Dodge/Plymouth Mini-Vans and FWDcars along with VW Routans. Use Rotary File Set 85130 to elongate holes.

These cams are used as an O.E. replacement on the frontand/or rear of vehicles listed.

To correct camber remove the O.E. lower control armattaching bolt and move arm away from the bracket. Using73010 Punch, enlarge the hole in the bracket and re-attachthe lower control arm using the correct mm bolt. To adjust,rotate the cam bolt.Note: make

Replace coroded or damaged factory front camber and caster bolts on the Dodge Ram 1500 with these hex chromate free 700 salt spray tested cam bolts from SPC. This kit is sold per wheel and gives you the same adjustment range as the factory cam, ±2° for...

Replace OE cams on the lower control arm of popular DodgeDakota light trucks with this kit. Get the ±2° camber/casterchange that you need and lock it in with this simple R&Rpiece.This Part Fits:YearMakeModelSubmodel2009-2010DodgeDakotaBig...

Replace the non adjustable or corroded OE bolts on Dodge 3/4and 1-ton trucks to get ± 1.5 ° degrees of caster and pinionangle change. Whether the truck is lifted or stock rideheight, optimize caster and pinion angles for bettertracking and axle/drive...

These cams replace the front axle bolts to provide casterand pinion angle (up to 3 degree total change).To elongate the OEM bolt holes use our knock out punch -# 74910. Front caster will change as you agjust pinionangle. Use our offset pin joints...

Replace frozen or worn lower control arm bolts with SPC's replacement adjusters. Designed for the rigors of RAM heavy duty trucks, these high strength bolts come with a corrosion resistant coating for long life. Adjust caster or pinion angle by ±2.0°...

Replace frozen or worn lower control arm bolts with SPC's replacement adjusters. Designed for the rigors of Ram heavy duty trucks, these high strength bolts come with a corrosion resistant coating for long life. Adjust caster or pinion angle by ±2.0°...

Dodge solid front axled 3/4- and 1-ton trucks equipped withnon-adjustable or corroded lower control arm bolts can nowreplace their OEM bolts (50mm cams) with the 82385 CasterAdjustment Kit (pair). These replacement cam bolts providecaster and pinion...

These cams replace the front axle bolts to provide casterand pinion angle (up to 3 degree total change).This Part Fits:YearMakeModelSubmodel1994-1996DodgeRam 1500Base1997-1999DodgeRam 1500Laramie1997DodgeRam 1500LT1997-1999DodgeRam...

Correct rear pinion angle issues on your stock or lifted Jeep with this adjustable cam kit from SPC. This kit designed specifically for the nwe Jeep Wrangler JL will provide ±1.5° of pinion angle adjustment. NOTE: You will need to slot the holes on...

Correct front pinion and caster issues on your stock or lifted Jeep with this adjustable cam kit from SPC. This kit is designed specifically for the new Jeep Wrangler JL and will provide ±1.5° of adjustment. NOTE: You will need to slot the axle...