Tools

Made from stainless steel, this Gator clamp is adjustable with either a screwdriver, wrench or Flex Tool from 3.125"-4.000". Featuring rolled edges, our clamps will not damage silicone hoses while sealing better than a parts store clamp.

Made from stainless steel, this Gator clamp is adjustable with either a screwdriver, wrench or Flex Tool from 2.375"-3.125". Featuring rolled edges, our clamps will not damage silicone hoses while sealing better than a parts store clamp.

Size Range: 1.625"-2.375" OR 40mm-60mm; Constructed of stainless steel continuous band with extruded, asymmetrical threads; Asymmetrical (offset) gear box minimizes clamp twist when tightening; Combination of asymmetrical gear box and extruded threads...

Size Range: 1.1875"-1.750" OR 30mm-45mm; Constructed of stainless steel continuous band with extruded, asymmetrical threads; Asymmetrical (offset) gear box minimizes clamp twist when tightening; Combination of asymmetrical gear box and extruded threads...

Our trunnion tool for GM LS engines allows you to precisely install trunnions and bearings in Chevrolet LS rockers. Compatible with arbor presses, c-clamps and bench vises, our tool makes it easy for anyone to upgrade LS rockers at home.

After compressing the VVT spring, this 5455 VVT spring limiter tool is used to hold the variable valve timing spring in place while installing our 5457 phaser limiter plug.

Before installing our 5455 spring limiter tool, it is necessary to compress the variable valve timing spring. This 5454 tool compresses the spring, so that you can install the 5455 limiter tool then the 5457 or 5459 phaser limiter plug.

The 5447 VVT spring compressor tool allows you to compress the VVT spring before inserting our 5446 spring lock tool. Compressing the spring is required before installation of both the lock tool and phaser limiters.

This tool allows for you to lock the variable valve timing spring in place when installing our phaser limiters. This tool is used to lock the phaser spring after our 5447 spring compressor tool has compressed it.

These COMP Cams Valve Train Organizer Trays are perfect for novice or pro engine builders alike. These durable polymer trays neatly store your valve train components while assembling or rebuilding your engine. Organizers are labeled front and rear, to...

COMP Cams Pro Spark Plug Viewer is handy for reading spark plugs or anytime close up inspection is needed. Its hooded design is perfect for inspecting spark plugs and the 10 times power magnification is aided by the light that shines directly on the...

Calibrate your miniature valve spring tester (5314) with this calibrated test spring.

This flange is designed to allow you to mount our 5314 spring tester in a drill press.

Don't risk your fingers when removing or installing valve locks anymore. COMP Cams Pro Valve Lock Removal and Installation Tool is definitely the best way to perform this delicate task. To install locks compress the valve spring, place locks on...

The Pro Valve Lock Removal and Installation tool for 7mm, 8mm and 5/16" locks allows you to both install and remove valve locks safely. Thanks to the magnetic stem, you can use our tool for any spring projects without risking your fingers.