Tools

Designed to handle the toughest job,the 73119 is adjustableand has special forged jaws shaped to fit the job. Positivegrip allows this tool to do many other pulling jobsCAUTION : NOT FOR USE WITH IMPACT WRECHES (AIR TOOLS)This Part...

This tool is a must when servicing rebuildable ball joints from SPC. The 30mm spanner wrench has 5mm pins and is specifically designed for SPC's p/n 72610 Porsche arms and Builder Series of ball joints. The steel spanner features a 3/8" square drive to...

These are tools needed to adjust toe on the new Ford SuperDuty pickups. With 1/2" drives.

These are tools needed to adjust toe on the new Ford SuperDuty Pickups. With 1/2" drives.

These tie rod tools spread the tie rod adjusting sleeve foreasier adjustment. You can use these tools with a breakerbar for additional power. With 1/2" drives.

These tie rod tools spread the tie rod adjusting sleeve foreasier adjustment. You can use these tools with a breakerbar for addition power. With 1/2" drives.

This tie rod tool spreads the tie rod adjusting sleeve foreasier adjustment. You can use these tools with a brackerbar for additional power. With 1/2" drives.

This kit includes part numbers 71959 through 71999. It willallow adjustment of most cars and light trucks and alsoincludes the two larger adjusting tools needed for the newFord Super Duty pickups. Tools have a 1/2" drive openingthat allows the use of a r

For VGB 610-On-The-Car Lathe---3 cut edges---positive rake6 bits per pack.

Four position feature and 360° rotation lets you gripthe sleeve properly, even with limited access. Fits mostpassenger cars & light trucks.

For Hunter Model # 201,205---Hunter Part # V302-07-167---12 cut edges ---- negative rake10 bits per pack.

Torque stick specification chart

This special 10 point socket is needed when removing the O.Erear lower control arm on new 2001 to 2006 Honda Civics,2003 and up Elements, 2002 to 2006 CRV's and 2002 to 2007Acura RSX's. Included with part numbers 69300 adn 69400.This Part...

The Honda Accord and Acura TSX Rear Adjustable Trailing Armis an ideal replacement for a damaged OE component,Additionally, it will provide ±1" set-back/wheel baseadjustment. This arm is necessary to to correct set-backchanges that the 67545 adjustable...

Our patented thrust alignment plate will allow forcorrections of setback and thrust angle on most vehicleswith rear leaf springs. Installation is made by looseningthe U-bolts holding the leaf spring to the axle, installingthe alignment plate between the a