Brake Hardware

Dynamic Lug Rotor Mounting and Snap Ring Kit contains rotor wear plates and internal snap ring retainer to mount one 8 lug Dynamic Mount Rotor to a hat utilizing Wilwood’s Dynamic Lug Mount system.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore...

Replacement rotor adapter for Wilwood Starlite XD55 hubs. Adapter is supplied with a 5 x 4.50” bolt pattern for hub mounting and a dual 8 x 7.00” dynamic or fixed bolt pattern for rotor mounting. Made from high strength aluminum alloy and hard anodized...

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore...

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore...

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for GP320 Calipers.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore...

Rotor adapter for Wilwood’s GEN II Sprint / Midget inboard hubs. Adapter is supplied with a rectangular 3.37” x 2.28” pattern for hub mounting and a dual 6 x 5.50” dynamic or fixed bolt pattern for rotor mounting. Made from high strength aluminum alloy...

Replacement front rotor adapter for Asphalt Midget hubs utilizing 6 x 5.00 bolt circle and standard 6 x 5.50” bolt circle rotors. Made from high strength aluminum alloy with a corrosion and wear resistant Type III hard anodized finish.

Cable Clamp with neoprene cushion. Plated steel construction. And available in .312 and .375 diameter.

Wheel Spacer and Hub Protector. With a wheel bolt circle of 5 x 4.50”/4.75”/5.00” and a 5mm (0.197’) thickness. Engineered from high strength steel alloy and with a plated finish.

Spacer kits for Wilwood’s Internal Drum Parking Brake brackets. Used to set kit brackets to specific axle offsets. Spacer kits come with spacers, bolts and washers. Kits vary in application in caliper applications. These specific kits are used with lug...

Caliper Rebuild Kit for Dynapro Single and Dynalite Single Calipers with 1.75” pistons. Contains piston seals, wear plates, bleed screws, pad retainer and cotter pin to service both styles of calipers. Parts are sufficient for one caliper only.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore...

Wilwood’s Tubular Bracket Spacers are used for spacing & offset changes on many applications available multiple diameters and lengths. Engineered from high strength aluminum alloy and finished with black e-coat finish.