Brake Hardware

Spacer kits for Wilwood’s Internal Drum Parking Brake brackets. Used to set kit brackets to specific axle offsets. Spacer kits come with spacers, bolts and washers. Kits vary in application in caliper applications. These specific kits are used with...

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet and Forged Dynalite 4 Piston and Dynalite / Dynapro...

Wilwood’s Pad Shim Kits feature a steel and elastomeric construction that dampens vibration transmitted between the rotor and pad. This is an industry standard to reduce NVH (Noise, Vibration and Harshness) response in vehicle platforms. Shim kits...

Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These sintered steel t-nuts are available in different thickness and bolt hole sizes.

Replacement Girling Style Master Cylinder Reservoir Cap with Dot 5 fluid markings. Baffle style with seal. Durable nylon construction with a black coloration. Works with all Wilwood master cylinder reservoirs with ‘Girling’ size threads.

Floating Rotor Adapter for Asphalt Racing Hubs with “backside” mounts. With a hub mount bolt circle of 5 x 5.00” and will mount any 8 x 7.00” bolt circle rotor. Made from high strength aluminum alloy with a corrosion and wear resistant Type III hard...

Spacer kits for Wilwood’s Internal Drum Parking Brake brackets. Used to set kit brackets to specific axle offsets. Spacer kits come with spacers, bolts and washers. Kits vary in application in caliper applications. These specific kits are used with...

Wilwood’s Tubular Bracket Spacers are used for spacing & offset changes on many applications available multiple diameters and lengths. Engineered from high strength aluminum alloy and finished with black e-coat finish.

Replacement Holdown Cup Spring for Wilwood’s internal Parking Brake kits and Brackets. Made from alloy steel and plated for corrosion resistance.

Spacer kits for Wilwood’s Internal Drum Parking Brake brackets. Used to set kit brackets to specific axle offsets. Spacer kits come with spacers, bolts and washers. Kits vary in application in caliper applications. These specific kits are used with...

Individual spacers for Wilwood’s Internal Drum Parking Brake brackets. Used to set kit brackets to specific axle offsets. Spacer are made from high strength aluminum alloy. Spacers widths will vary in application based on caliper. Please see...

Wilwood’s Pad Shim Kits feature a steel and elastomeric construction that dampens vibration transmitted between the rotor and pad. This is an industry standard to reduce NVH (Noise, Vibration and Harshness) response in vehicle platforms. Shim kits...

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet and Forged Superlite Calipers using .80” thick pads.

Caliper Bridge Spacer Kits contain bolts, bridge spacer and other hardware to convert Narrow Dynalite, Narrow Dynapro and Forged Narrow Dynalite Calipers to different rotor widths. 300-6588 will convert 0.38 and 0.81 to 1.25” wide rotor width, 300-6589...

Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These sintered steel t-nuts are available in different thickness and bolt hole sizes.