Valve Springs, Retainers

Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4643 features a 1.540" OD and a .640" ID that works well with our 26947 dual valve springs.

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4643 features a 1.540" OD and a .640" ID that works well with our 26947 dual valve springs.

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4642 features a 1.540" OD and a .570" ID that works well with our 26947 dual valve springs.

Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4641 features a 1.540" OD and a .520" ID that works well with our 26947 dual valve springs.

Comp Cams Id Spring Seat Set, For 26547 Spring W/ .520In Dia Guide

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4641 features a 1.540" OD and a .520" ID that works well with our 26947 dual valve springs.

COMP Cams Magnum 5.2L/5.9L Drop-in Valve Spring Kit is designed to maximize the potential of Magnum Cylinder Heads. Allowing up to .500" of lift, this kit provides spring rates that can handle significantly more aggressive lobe profiles. Designed to drop...

Comp Cams Dual Valve Spring, .660In Lift, 1.320Inod Bulk Pack

Developed specifically for '15+GM LT4 engines, this Beehive valve spring kit offers greatly-improved valve control and increased high-rpm stability along with a maximum valve lift of 0.600". No guesswork, drop-in ready.

Including our LS6+ Beehive Valve Springs, hardened spring seats, viton valve seals and machined steel locks and tool steel retainers, this kit is a great way to freshen up LS heads. Allows for a maximum of 0.580" valve lift.

Our LS6+ Beehive Valve Springs are a great way to freshen up LS heads. These Beehive springs offer .580" max lift, and these springs deliver higher seat and open pressures, along with a higher spring rate than GM LS6 "blue" springs.

1.550" High Lift Dual Valve Springs for Racing Applications

1.550" High Lift Dual Valve Spring for Racing Applications

COMP Cams engineered the #26124 valve springs to have increased spring rate, as well as higher seat load for much better dynamic stability than factory springs. Unique ovate spring wire was selected to better manage operation stresses, create additional...

COMP Cams engineered the #26124 valve springs to have increased spring rate, as well as higher seat load for much better dynamic stability than factory springs. Unique ovate spring wire was selected to better manage operation stresses, create additional...