Additives

For best results and long-term effect add DPF protector exery 2.000 km (1.200 miles). One 300 ml can is sufficient for 75 liters (20 gal.) of Diesel. Minimum fuel filling of50 liters (14 gal.) is...

MOTUL AUTOMATIC TRANSMISSION CLEAN is a pre-drain automatic transmission cleaner designed to be used in all types of automatic transmissions, conventional with torque converters (AT), with dual...

The unique combination of proven PEA technology and the latest additive generation achieves maximum cleaning performance in the combustion chamber, in and around the injector tip and in the entire...

Provides initial lubrication of new or replaced turbochargers to prevent damage due to oil starvation. Damage to turbocharger may occur within seconds of engine start if not lubricated properly...

Add contents to the cooling water. Turn the heating to maximum and let the engine run on idle for 10 - 30 minutes depending on the degree of contamination. Drain the coolant and flush the cooling...

One 500 ml can is sufficient for up to 5 liters(1.3 gal.) of oil. Add Pro-Line Engine Flush to the engine oil at operating temperature before changing the oil. After adding the product allow the...

To be added directly into the fuel tank. As a preventive measure, add during each inspection, after repairs on the fuel system and after each Jet-Clean cleaning operation. The product mixes with the...

To be added directly into the fuel tank. As a preventive measure, add during each inspection, after repairs on the fuel system and after each Jet-Clean cleaning operation. The product mixes with the...

Spray components before installing them. If the contacts are heavily corroded, allow the product to act for longer and rub off corrosion residues with a cloth or brush. Note: After spraying on, allow...

Keeps rubber and plastic seals in hydraulic power steering systems soft and pliable. Leaks caused by hardened and brittle seals are prevented or eliminated. Cleans internal oil passages to allow...

A combination of agents, developed specifically for late model hybrid engines. Removes deposits in the fuel system and protects against corrosion. Stabilizes the fuel and protects against aging and...

Ensures immediate friction and wear reduction, adds an extremely protective and pressure-resistant boundary layer with low friction and lubricates during cold starts to prevent damage from lack of...

For best results and long-term effect add DPF protector every 2.000 km (1.200 miles). One 500 ml can is sufficient for 115 liters (30 gal.) of Diesel. Minimum fuel filling of50 liters (14 gal.) is...

An effective mixture of additives that clean and maintain diesel fuel systems. Prevents corrosion, increases lubrication thus reduces fuel pump and injector wear. Increases Cetane value for improved...

Aneffective mixture of additives to clean and maintain the fuel system of port injected and carburetedgasoline engines. Cleans injectors, the combustion chamber and protects against corrosion...