SPC Performance

This pair of adjustable upper control arms will allow ±1.5° camber and/or caster change on a wide range of Audi models. These arms directly replace factory fixed-length arms, allowing easy...

This pair of adjustable upper control arms will allow ±1.5° camber and/or caster change on a wide range of Audi models. These arms directly replace factory fixed-length arms, allowing easy...

Get ready for the track with this four (4) arm set of adjustable upper links for many Audi models. This kit has four arms so you can change camber and caster ±1.5° on both sides. xAxis sealed flex...

Add more adjustment to the rear suspension on your Ford Expedition with this fully adjustable camber control arm. This arm replaces the factory non-adjustable upper control arm and allows easy on-car...

This sleeve changes camber and caster on many older modeltrucks and SUVs with Dana 44 or GMC 10 bolts axles. 4169spanner socket is required for removal. Rotate sleeve tofine tune camber/caster...

Change camber,caster or both at the same time with thesesleeves. Simply remove the tire, cotter pin and upper balljoint stud nut and break the taper free between the studand sleeve. Using a sleeve...

These popular sleeves are widely used to adjust caster and/or camber on many Ford and Mazda RWD & 4WD trucks. Toinstall, simply loosen and remove upper ball joint pinchbolt. Remove top snap ring if...

Change camber,caster, or both on twin traction beam Dana 44swith these sleeves. Simply remove the tire, cotter pin andupper ball joint stud nut and break the taper free betweenthe stud and sleeve...

Ford changed the axle design in 2005 on their Heavy Dutytrucks. These sleeves correct camber and caster on theseF250 and F350 Super Duty trucks. Use the 23229 zero degreesleeve to determine the...

These truck sleeve will correct alignment problems on theF450 and F550 Super Duty trucks with Dana Super 60 solidaxles. To split camber and caster adjustment, rotate sleeve45° Use the 23239 zero...

For camber and toe change, use our Mini-Van Shims that allowfor quick and easy changes in increments of: toe .10 degreesand camber .25 degrees. CAUTION:check brake and rotorclearance for binding...

These shim kits let you change front camber on Dodge,Freightliner and Mercedes Sprinter Vans. Their unique designallows the technician to 'lock' the alignment settings.These shims install quickly and...

This sleeve changes camber and caster on many older modeltrucks and SUVs with Dana 44 or GMC 10 bolts axles. 4169spanner socket is required for sleeve removal. Rotate sleeveto fine tune camber/caster...

Change camber,caster or both at the same time with thesesleeves. Simply remove the tire, cotter pin and upper balljoint stud nut and break the taper free between the studand sleeve. Using a sleeve...

These popular sleeves are widely used to adjust caster and/or camber on many Ford and Mazda RWD & 4WD trucks. Toinstall, simply loosen and remove upper ball joint pinchbolt. Remove top snap ring if...