SPC Performance

Ford changed the axle design in 2005 on their Heavy Dutytrucks. These sleeves correct camber and caster on theseF250 and F350 Super Duty trucks. Use the 23229 zero degreesleeve to determine the...

These truck sleeve will correct alignment problems on theF450 and F550 Super Duty trucks with Dana Super 60 solidaxles. To split camber and caster adjustment, rotate sleeve45° Use the 23239 zero...

SPC Performance 1.0 deg. Camb/Toe ShimThis Part Fits:YearMakeModelSubmodel2012-2018NissanVersa1.6 S2013-2018NissanVersa1.6 S Plus2012-2017NissanVersa1.6 SL2012-2018NissanVersa1.6 SV2012NissanVersa1.8...

SPC Performance 1.0 deg. CAMB/TOE SHIM-Peugeot

This full contact rear shim adds positive 1.0° camber tominimize camber related tire wear for 08-09 Ford Taurus and05-07 Ford Freestyle FWD. Brake caliper shim included forcorrect hub to caliper...

Often called "dimple dies", flared hole dies are used insheet-metal fabrications to provide rigidity and strength toflat, unsupported panels. Due to the resulting high strength-to-weight ratio...

Often called "dimple dies", flared hole dies are used insheet-metal fabrications to provide rigidity and strength toflat, unsupported panels. Due to the resulting high strength-to-weight ratio...

Double your suspension capacity:6" long base unit is great for tight spaces with 1:1,2:1 or3:1 motion ratios.

SPC Performance 1/16in. DUO FIT SHIM (25)

SPC Performance 1/16in. DUO FIT SHIM (25)

SPC Performance 1/16in. THICK TUBE-40910

Required: 1 per wheelThis sleeve changes camber and caster on many older modeltrucks and SUVs with Dana 44 or GMC 10 bolts axles. 4169spanner socket is required for sleeve removal.Rotate sleeve to...

Change camber,caster or both at the same time with thesesleeves. Simply remove the tire, cotter pin and upper balljoint stud nut and break the taper free between the studand sleeve. Using a sleeve...

These popular sleeves are widely used to adjust caster and/or camber on many Ford and Mazda RWD & 4WD trucks. Toinstall, simply loosen and remove upper ball joint pinchbolt. Remove top snap ring if...

Change camber,caster, or both on twin traction beam Dana 44swith these sleeves. Simply remove the tire, cotter pin andupper ball joint stud nut and break the taper free betweenthe stud and sleeve...