Bump Stops

Developed in racing and refined for everyday use, FOX Factory Race Series bumpstops are the perfect addition to any aggressive offroad build, working together with your FOX shocks to create the feel of near bottomless travel.

SPC Performance High-Strength 2-Piece Steel Rod End (3/4in.)

OEM cone style to replace worn bump stops.

Dial in your up-travel stops on your coil over suspensions.These easy to use Jounce Bumper Spacers allow you to controlup-travel by simply placing urethane spacers betweenyour factory bump stop and the shock body. The closed wedgedesign allows you to inst

Double your suspension capacity:9" long base unit is ideal for 1:1 motion ratios

The seals, O-rings,wear bands,and valve pieces you willneed to rebuild one (1) JounceShock,Kit includes ShockValve Extension (#25515) for charging your JounceShock.

Double your suspension capacity:6" long base unit is great for tight spaces with 1:1,2:1 or3:1 motion ratios.

The Cupped 90 Durometer Rubber Foot & Domed Target allowsup to 30 degrees of JounceShock motion as your suspensiontravels and articulates. The 90 durometer rubber cup withstands high compression while maintaining silenced couplingof the cup and target.

The Rubber Cupped Foot screws directly onto the shaft end ofthe JounceShock.The high durometer Cupped Foot is normallyused in conjuction with the Domed Target(which is bolted orwelded to the control arm or axle).This Foot targets yourJounceShock to meet t

The Domed Rubber Foot screws directly onto the shaft end ofthe JounceShock.This high durometer Rubber Foot is usedprimarily in applications with scrub,or sideways movement,onto a Target Plate.The Domed Rubber Foot is both quite uponimpact and durable maki

The Domed foot screws directly onto the shaft of theJounceShock.This is the most traditional of bumpshock endsand is most often used in an application with some scrub ona Target Plate. It can also be used in conjunction with theShaft Extender # 25603.

The Domed foot screws directly into the shaft of theJounceShock.This is the most traditional of bump shock endsand is most often used in an application with some scrub ona Target Plate.It can also be used in conjuction with theShaft Extender # 25603 below

The threaded Cupped Foot with the Domed Target,which can bebolted or welded to your JounceShock for up to 30° ofmotion as your suspension travels.

This universal mount provides a versatile weld or bolt onoption to mount your JounceShock in a fixed position(trim to fit)

The Coil Carrier / Bolt Up Mount can be sandwiched in yourspring seat or bolted to the bottom of a frame.Plate can betrimmed to square as a bolt up or welded frame mount.