Intake Manifolds

Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane intake manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy...

Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane intake manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy...

Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane intake manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy...

Performer Air-Gap Series Intake Manifold is designed for 1955-86 262-400 c.i.d. small-block Chevys, the Performer Air-Gap features the air-gap design for the ultimate street performance in the idle to 5500 rpm range.

Performer 351-4V is designed for street 351C and Boss 351 Fords that came stock with 4V carb and heads. Performer 351-2V is designed for street 351C and accepts 4V carb, however its designed to improve the performance of engines that came stock with 2V...

Performer Air-Gap Series Intake Manifold is designed for 1955-86 262-400 c.i.d. small-block Chevys, the Performer Air-Gap features the air-gap design for the ultimate street performance in the idle to 5500 rpm range.

Designed for spread-bore carbs but also works with Edelbrock square-bore carbs without adapter on street 396-502 c.i.d. Chevy V8's with large oval-port (1975 and earlier) heads. No provisions for hot air style chokes. Accepts divorced choke, late-model...

Performer Air-Gap Series Intake Manifold is designed for 1955-86 262-400 c.i.d. small-block Chevys, the Performer Air-Gap features the air-gap design for the ultimate street performance in the idle to 5500 rpm range.

Performer Air-Gap Series Intake Manifold is designed for 1955-86 262-400 c.i.d. small-block Chevys, the Performer Air-Gap features the air-gap design for the ultimate street performance in the idle to 5500 rpm range.

Edelbrock part #76543 Flare to Pipe fitting features a 6 AN x 1/2" NPT straight end with blue anodized finish. Use the AN size that matches your hose and the NPT (National Pipe Thread) size that matches the component you are plumbing.This Part...

PERFORMER RPM VORTEC (1500-6500 RPM) Based on the powerful Edelbrock #7101, this single four-barrel intake is designed for the street rod, marine and engine swap market utilizing 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron or...

Designed for 440 c.i.d. Chrysler engines with 3x2-bbl, carbs, also fits 413 and 426 Wedge. #2475 is stock replacement/street legal part for 440 V8s with OEM 3x2-bbl. carbs; 1968-71. This manifold was original equipment on Chrysler 440 Six-Pack engines,...

PERFORMER RPM Q-JET (1500-6500 RPM) Designed for 1955-86 262-400 c.i.d. Chevy V8's for spread-bore (Q-Jet) or square-bore carbs. Delivers maximum power and a broad torque curve for high-performance street. Carb pad will accept square-bore carbs without...

PERFORMER RPM Q-JET (1500-6500 RPM) Designed for 1955-86 262-400 c.i.d. Chevy V8's for spread-bore (Q-Jet) or square-bore carbs. Delivers maximum power and a broad torque curve for high-performance street. Carb pad will accept square-bore carbs without...

Edelbrock part #76532 Flare to Pipe fitting features a 4 AN - 1/4" NPT straight end with blue anodized finish. Use the AN size that matches your hose and the NPT (National Pipe Thread) size that matches the component you are plumbing.This Part...