Camber Kits

Add a little horsepower, use grippy tires, launch hard, and take a corner at 1.5 G's. You need an adjustable rear control arm to optimize your tire contact by adjusting your camber. Be confident your arm is proven and reliable for the >1,000 pounds of...

This cam bolt kit provides caster adjustment by replacingone of the two factory bolts that mount the rear control armbushing bracket. Elongation of the pre-marked factor holesis required - we recommend using rotary file set 85130 orsimilar. Includes one...

This kit bundles a pair of EZ cams (p/n 81260) foradjusting camber +/-1.5 degrees, with two 72355 CasterBolts. Together these parts overcome the non-adjustablefactory design to provide complete adjustability forimproved handling, educed tire wear, and...

Replace the non-adjustable rear upper control arm on theNissan Altima with SPC's fully adjustable arm to get ±2.5°of camber change. This remove and replace arm is perfect fortraditional alignment correction, to enhance handling, or asa direct...

These cams (set of 2) replace the OE camber and toeadjustment cams and provide additional camber and toechanges. Adjustment slots will need to be elongated using85130 rotary file or equivalent.This Part...

This is the perfect kit for lowered Zs or G35s and G37sInfinitis. Provides additional camber and comes with alarger offset toe cam to bring the toe angle back intorange. Use the 85130 rotary file to elongate the toe slots.This Part...

Use this adjustable control arm from SPC Performance to givethe rear of your Infiniti Q50 or Q70 extended toeadjustability. The remove and replace link will provide anadditional ±3° of toe beyond what the OE cam bolt offers.This will often be necessary...

Use this adjustable trailing link from SPC Performance tomake the rear of your Infiniti Q50 or Q70 fully adjustablefor set-back / wheel base. The remove and replace link willprovide ±1" movement to adjust for other suspensionmodifications, be ready for...

Use this adjustable control arm from SPC Performance to makethe rear of your Infiniti Q50 or Q70 fully adjustable forcamber. The remove and replace link will provide ±3° ofcamber to adjust for other suspension modifications, beready for the track, or...

Use this three arm set(3) to make the rear of your InfinitiQ50 or Q70 fully adjustable for camber, toe and wheelsetback. Whether you are modifying for stace, wantadjustability for the track or simply need to replace an OEarm, this is the kit for you...

These cams (set of 2) replace the OE camber and toeadjustment cams and provide additional camber & toe changes.Adjustment slots will need to be elongated using 85130rotary files or equivalent.This Part...

This is the perfect kit for the lowered Z or G35. Providesadditional camber and comes with a larger offset toe cam tobring the toe angle back into range. Use the 85130 rotaryfile set to elongate the toe slots.This Part...

Use this fixed change shim to adjust rear camber on the Honda Fit ±1.0°. Need toe change too? Stack a toe shim with this camber shim. See toe shims 71791-71795. See a lot of Fits? Consider shim kit 71790, it has two each of every shim to make sure you...

Use this fixed change shim to adjust rear toe on the Honda Fit ±0.10°. Need camber change too? Stack a camber shim with this toe shim. See camber shims 71796-71799. See lots of Fits? Consider shim kit 71790, it has two each of every shim to make sure you...

With these shims you can correct both rear camber and toeon newer Volkswagens & Audis. By combining the shims (twomay be used per wheel) you can get up to +/-.50 degrees toeOur wrench (87530) is a must wheninstalling these shims. It allows you to remove...